I like to see how other people store their kitchen knives. It's a detail I often zero in on when visiting a new kitchen or looking at photos of kitchens. Are the knives tucked away in a stealth in-drawer block? Or are they out in the open in a traditional countertop block, or suspended from a magnetic strip?
Recently, I spotted a knife storage solution that, after hours of online searching, I realized is entirely bespoke: a leather knife rack mounted to the side of a kitchen island. I had to have one, so I made my own—and discovered that with a pliable piece of leather, it's a pretty simple thing to create. And you can tailor each loop in the rack to fit your own needs—no advanced knife skills necessary.
Materials
- A piece of wood cut to the desired length. I used a 12-inch by 2-inch by 1-inch piece of poplar (choose a soft wood if you plan to use pushpins)
- Leather hide, at least 14 by 7 inches (enough to generously wrap the entire piece of wood).
- A handful of pushpins
- Sandpaper, scissors, a hammer, and an awl (such as the General Tool 818 Scratch Awl; $4.34 from Amazon)
Instructions
Step 1: Flip the piece of leather over so that the inside of the hide faces up. Place your sanded piece of wood on top and eyeball how you'll wrap it with the leather; measure, mark a pattern, and then cut to your liking.
Step 2: On each end of the wooden block, trim the leather so that it can be wrapped tightly against the wood. If your leather is on the thinner side, you can wrap the ends of the wood as you would a gift box, folding it over itself. If your leather is a thicker cut, as mine was, you'll want to make L-shaped cutouts so that you don't have unnecessary excess. If you're using soft wood and leather, you can secure each section with a simple pushpin. If the wood is hard and leather is thick, you'll want to puncture your leather with an awl and use a nail to create a hole before applying a pushpin.
Step 3: Once you've pinned down each end of the wood, fully wrap the block overlapping the leather on the side that won't show (and trimming as necessary). Secure the leather in place with a series of evenly spaced pushpins (I used three).
Step 4: Flip over the block to the display side. To create the knife holder, cut a strip of leather that is about one inch thick (or adjust as desired; leave extra length so that there's room for error). Pin down one end of the strip in the center of the block about an inch from the end.
Step 5: Push the leather against itself until it makes a loop. Secure the loop in place with a pushpin, and then continue making loops and pinning then down, adjusting each to your liking, until you've reached an inch from the end. Consider customizing your knife rack to your own set of knives and kitchen tools: I created one large loop to hold my kitchen scissors, and smaller, tighter loops for my knives.
Step 6: To mount the finished rack on the wall, there are a variety of options: you can hang it like a picture frame using a length of wire and a pushpins on the back, or you can nail the entire piece to the wall, or nail two sawtooth hangers on the back and hook them onto the wall (the approach I took).
The Finished Look
Above: The knife rack hangs next to my stove for easy access to kitchen shears and paring knives. An alternative option is to nix the wooden block altogether and create an all-leather knife holster that hangs directly on the wall—something I hope to try in my next apartment.
Photography by Alexa Hotz for Remodelista.
What to do with leftover scraps of leather? Have a look at 10 DIY Projects Using Leather and Erin's recent DIY: Braided Leather Drawer Pulls. Looking for a place to store garden tools? On Gardenista, have a look at a Powder-Coated Steel Tool Rack.
More Stories from Remodelista